Integration of nForce SataRaid drivers

[Joggie]

Hi Fernando,

My questions:
1. Do you have any OS installed onto your 160 GB hdd (connected to Sata3 port)?
No.

2. When you created your Raid array, did you set your Raid array as "bootable" (active)?
I dont think during windows install process it actually ask me for that.
I did show two drives, Raid 0 and the other sata drive(160gb). I pointed to the raid0 partion and selected the full 160 gb partion. Then windows complained it cant install, it need's the other drive to copy some files.

3. Have you set the Raid as first bootable hdd within BIOS?
In the bios it saw 3 hd.
Serial-ATA1 enabled.
Serial-ATA2 enabled.

nVidia Raid Function enabled.

SATA1 controller enabled.
SATAT2 controller disabled.
Comment according to the manual SATA1 and SATA2 controler are user-configuarable only if you use nVidia Raid Function.
Exit bios configuration (F10)
Then I rebooted pc went to raid-utility.
Selected Raid-Stripping, then stripping block.
Then pressed F7 to creat raid-set.
Then I exit from raid uitility.
Started OS installation.

Regards


Joggie